| Soft Link is the TCP/IP based shared Internet service which uses its own International Gateway for the upstream connectivity.At present STPN backbone is connected through Up Stream Service providers to provide load balancing and fully redundancy services.
The TCP/IP service is called shared Internet as the upstream bandwidth is shared among the users. The user connected on the service has access to the complete Internet services available world wide such as:
- E-Mail
- FTP - ( File Transfer Protocol )
- Remote Login
- WWW (World Wide Web)
- UseNET.
- Data base access.
How to access the SoftLink ?
SoftLink is managed through a Wide Area Network plan . You will get a port on the ethernet Hub which will be Located in the LAN. The LAN will be further connected to the International Gateway and managed from Network Control Centre which will be located at STPI-Shimla.The LAN set-up will be directly connected to the International Gateway through a UTP backbone,whereas the LANs in different locations will be connected to the International Gateway via a microwave link
You can locate your unit anywhere outside in the city .STPI-Shimla will provide Point-to-Point or Point-to-MultiPoint radio link upto the ROUTER at your premises.
1) Leased Interent Access on Radio Local Loops:
Microwave radio connection of the desired bandwidth is set up from customer's premises to the International Gateways of STPI. These links are installed and maintained by STPI itself and the customer has to pay just one time installation charge. The data rate option for the Leased Interent Service on Radio are n x 64 Kbps or n x 2048 Kbps. 2.)Leased Interent Access on DoT Local Loop: A wired n x 64 K is hired form DoT for the customers. The customer will need to hire a lease line, of the required data rate, from DoT and will pay for the installation and annual lease access for the local loop. STPI will provide port access on its router and will charge for the same.
3). Leased Interent Accesss Using ISDN Lines:
Those who wished to use their ISDN lines for Interent access can use this facility. Customer will have to pay for an additional ISDN line at STPI as the line has to be used in dedicated mode. Service is presently available for ISDN, BRI and leased connection is for 64 Kbps or 128 Kbps.
Dial-up Interent Access
In dial-up access, a connection is established between the access and the STPI network on dialing the specific number(s) by the authorised subscribers.
A dial-up access is offered with the following options:
1). Dial-up Interent Access Using ISDN lines:
2). Dial-up Interent Access PSTN lines |